Spray Foam

Viewing 1 to 8 (8 Total)

SPRAYTITE®

 

SPRAYTITE®

SPRAYTITE® closed-cell, spray-applied polyurethane foam insulation and air barrier material helps improve the energy efficiency, comfort and durability of homes and buildings. As both an effective insulation and air barrier material, SPRAYTITE technology substantially improves thermal comfort, and reduces air leakage and the passage of moisture through the building envelope. Combining air impermeability with a superior R-value (6.0 per inch) translates into a highly energy efficient building that is both affordable and comfortable.

 SPRAYTITE technology uses ZONE3® zero-ozone-depleting blowing-agent technology, emits no volatile organic compounds (VOCs) and is one of the most environmentally responsible and lowest lifecycle cost systems available. By eliminating condensing surfaces and offering no food source, it also resists mold, mildew and pest infestations, contributing to a safer, healthier indoor environment. SPRAYTITE technology allows design professionals and builders to specify a material that meets and exceeds the required performance criteria for every code and climate.

 

ENERTITE®

 

ENERTITE® improves energy efficiency

ENERTITE® can be used to improve energy efficiency or to provide a barrier against unwanted sound.  When you insulate with ENERTITE® you choose:  improved energy efficiency,  an affordable option for superior insulation, increased comfort, excellent sound control, healthy indoor air quality, good adherence to wall (will not sag), and an environmentally-friendly product.

 

JM Corbond III® SPF

 

JM Corbond III® SPF

JM Corbond III closed-cell spray polyurethane foam (SPF) is a premium insulation solution, creating an advanced thermal, air and moisture barrier. This powerful insulation offers a maximum lift thickness of up to three inches in a single pass, providing an R-value of 19 at 3 inches and R-39 at 6 inches. JM Corbond III® SPF has one of the highest-yields of any closed-cell foam insulation and can be installed in temperatures as low as 25 degrees Fahrenheit. The line of TPR2 Fireshell™ intumescent coatings are recommended for application as an ignition barrier for JM Corbond III® SPF, as required by International Building Codes.

 

JM Open-cell Spray Foam (JM ocSPF)

 

JM Open-cell Spray Foam (JM ocSPF)

JM Open-cell spray foam (JM ocSPF) is a low-density, nonstructural insulation that offers a high yield while still providing important air isolation, versatile R-values, excellent acoustical performance. When installed at a thickness of 1 inch, it provides an R-value of 3.8, R-13 at 3.5 inches, and R-19 5.5 inches. JM ocSPF has a wide application temperature range and can be installed as low as 40 degrees Fahrenheit.

 

CertaSpray® Closed Cell

 

CertaSpray® Closed Cell

Cti09PapSfcCy0002C.jpg

CertaSpray closed cell foam insulation is the newest addition to the complete line of quality insulation Products from CertainTeed. As an all-in-one insulation air sealing system, CertaSpray foam insulation is designed to solve your extreme insulation requirements.

 

CertaSpray foam is appropriate for whole house applications or in combination with fiber glass, and is supported by the CertainTeed Building Science Professionals. These professionals are experts at recommending the best performing thermal envelopes. Best of all, you get it all from an insulation leader you already know and trust - CertainTeed.

 

CertaSpray® Open Cell

 

CertaSpray® Open Cell

Cti09PapSfoCy0002C.jpg

If you’re concerned about comfort and energy savings in your new home, CertaSpray foam is your best choice. It provides best-in-class performance from a name you trust for the highest quality building products—CertainTeed.

CertaSpray foam insulation performs like no other insulation. It provides an effective air seal which reduces energy loss and improves indoor air quality. Adds to your home’s resale value, too. You can actually feel the difference in your everyday quality of life!


 

Flame Seal TB™

 

Flame Seal TB™ is the world’s leading over Spray Foam Insulation.

 

FS- TB™ is a two component product and the only SPF coating with zero

flammable components (such as latex). This is not an architectural paint,

but a dedicated fire safety coating from ONLY fire resistant rawmaterials.

 

3M™ 2-Component Refillable Spray Foam Insulation System

 

Low Pressure Spray Foam Insulation System

No calibrating, no guesswork, no excuses!

• Reliable, consistent ratio holding

• No electricity

• Low startup cost

• Class I, 1.75 lb. density, closed cell foam

• Cost effective refill system; no container

disposal problems

• Ideal for small and medium jobs

• Complimentary addition to a big spray foam

trailer rig