Rigid Foam

Viewing 1 to 5 (5 Total)

THERMAX™

 

THERMAX™

 

THERMAX™ Sheathing is a non-structural, rigid board insulation consisting of a glass-fiber-reinforced polyisocyanurate foam core laminated between 1.0 mil smooth, reflective aluminum foil facers on both sides. The reinforcement, along with chemical modifications, contributes to fire resistance and dimensional stability. THERMAX™ Sheathing can be installed exposed to the interior without a thermal barrier and is especially appropriate for hourly rated assemblies

 

Thermax White Finish Insulation

 

Thermax White Finish Insulation

Thermax White Finish polyisocyanurate insulation is designed as an insulation and interior finish system for interior masonry or concrete walls, plus walls and ceilings in metal, wood post frame, and concrete or masonry buildings, as governed by building codes.  The glass fiber reinforced polyisocyanurate foam core of Thermax White Finish is faced with nominal 1.25 mil embossed white acrylic coated aluminum on one side and 0.9 mil smooth aluminum on the other.  The white embossed surface of Thermax White Finish is aesthetically pleasing and easy to clean.  It can be pressure washed up to 1,000 psi with a 15-degree or greater spray tip (at minimum 3' distance).

Thermax White Finish insulation can be installed exposed to the interior without a thermal barrier.

 

STYROFOAM™ Brand UTILITYFIT™

 

STYROFOAM™ Brand UTILITYFIT™

XPS 15 PSI Extruded Polystyrene Foam Insulation is a versatile, utility-grade product manufactured for applications that require a high R-value* and outstanding moisture resistance without the need for high compressive strength. STYROFOAM™ Brand UTILITYFIT™ XPS 15 PSI Insulation is designed for use when a Type X, or lower-compressive strength, product is needed. If the superior properties of a Type IV 25 psi product are not required, STYROFOAM™ Brand UTILITYFIT™ XPS 15 PSI Insulation is a good choice for your application.

 

Rigid Foam Board - White

 

Johns Manville CI Max® is a high efficiency rigid foam sheathing designed for exposed interior applications. It is composed of a uniform closed-cell polyisocyanurate foam core bonded on each side to glass-mat-reinforced 1.5 mil embossed aluminum facers. Available in a white or silver finish, CI Max foam sheathing is approved for use without a thermal barrier and provides an attractive and durable interior finish. It is suitable for wall or ceiling applications in residential, commercial, agricultural and industrial buildings.

 

Rigid Foam Board - Silver

 

Johns Manville CI Max® is a high efficiency rigid foam sheathing designed for exposed interior applications. It is composed of a uniform closed-cell polyisocyanurate foam core bonded on each side to glass-mat-reinforced 1.5 mil embossed aluminum facers. Available in a white or silver finish, CI Max foam sheathing is approved for use without a thermal barrier and provides an attractive and durable interior finish. It is suitable for wall or ceiling applications in residential, commercial, agricultural and industrial buildings.